Hard Drive Clicking? Common Causes and How to Recover Data

Spread the love

Hard drive clicking is an annoying sound that alerts you that your hard drive is failing or has already failed. A clicking noise can cause a lot of stress and worry when it comes from your hard drive. It’s essential to know the common causes and what you can do to recover data with minimal consequences.

Hard drives are one of the most common parts inside a computer that fails, but there are ways to prevent them from clicking at all. With this guide and some essential maintenance, you’ll be able to stop worrying about clicking and focus on all the good things in life like family and friends.

What causes clicking sound in the hard drive?

Several causes can cause clicking sound in the hard drive. You should be able to identify the problem and take preventive measures immediately to go hard drive data recovery near me.

Hard drive clicking can happen due to several reasons such as:

Hard drive is failingĀ 

This is the most common cause for the clicking sound in the hard drive. Hard drives are designed to last for a certain period which varies from technology to technology, but these drives usually last for 3-5 years before they have to be replaced. If your hard drive has already failed, it’s time to replace it with a new one. Hard drives tend to click when there is data loss or corruption due to data loss or damage due to physical damage such as scratches, scratches, and dust.

Hard drive is overheating

Hard drives also tend to click when overheating. If your hard drive is overheating, it’s time to clean the dust and cool down the hard drive before you do anything else. If the hard drive is really hot, it’s best to unplug it from power and let it cool down for a while before you continue with the maintenance. Unplugging the hard drive can prevent damage due to sudden power fluctuations.

Hard drive is going bad

Several signs indicate that your hard drive is going bad, and you need to replace it. The first thing that should catch your attention is noises or clicking sounds coming from your computer, especially from the hard drive. If you hear noise from the hard drive, it’s a good idea to restart your computer and check if there is any change in the clicking sound.

If you are using a laptop, you should always ensure that the hard drive is not overheating or getting too hot. If your hard drive gets too hot, unplug it and let it cool down for some time before you continue with the maintenance.

How do you fix a clicking hard drive?

If you want to know how to fix a clicking hard drive, then here are some things you should do. First, boot up your computer and go to the BIOS Setup.

Go to the hard drive section and see if there is a checkbox for “Enable SATA” or “Enable AHCI” (Advanced Host Controller Interface). If yes, then uncheck these options and restart your computer. If not, you need to re access the BIOS setup and enable these features.

Now that you have enabled these features, boot up your computer again and see if it boots up correctly. If it does not work properly, try checking for any updates on the hard drive and the BIOS.

If you have any questions regarding fixing a clicking hard drive, do let us know in the comments section below

Leave a Reply

Your email address will not be published. Required fields are marked *